NS202 Automotive Battery Registration BMS Reset And OBD Diagnostic Tool The NS202 OBD/EOBD diagnostic and battery reset tool from NEXAS supports 10 modes of OBD/EOBD tests for a complete diagnosis, battery check and battery life reset / steering angle reset. In addition to OBD/EOBD diagnostic, NS202 provides a quick, easy and affordable solution for technicians to do battery check and battery life reset, adapt new battery to vehicles ECU (failure to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode) and make necessary steering angle calibration specially for vehicles with BMS.


1.         OBD/EOBD + CAN Diagnostic Works on all cars, mini vans and light duty vehicles (OBDII & CAN) from 1996 on and latest – European, American and Asian;

2.         Unique quick battery check to tell the battery health status in 2 seconds;

3.         Battery Management System Reset quickly and easily reset the battery life, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode;

4.         Steering Angle Sensor Reset after disconnect battery, this is a MUST DO step when you replace a battery for BMW/MINI;

5.         Support all OBDII protocols: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000;

6.         Read and erase generic codes (P0, P2, P3 and U0), manufacturer specific codes(P1, P3 and U1), and pending codes ;

7.         Easily determine the cause of the Check Engine Light(MIL), and turn off Check Engine Light (MIL) by erasing the trouble codes and  Monitors reset;

8.         Display DTC definition, freeze frame data, monitor and I/M readiness status (emissions), and vehicle information (VIN, CIN and CVN);

9.         Read out live O2 sensor test data, PCM live data stream ;

10.     Multilingual menu and DTC definitions – English, Spanish, French, Deutsch, Italian And Russian;

11.     Software upgrade via internet;

Battery Registration & BMS Reset Coverage: