ND606 Mercedes-Benz Multi-System Diagnostic Scanner NexDiag ND606 for Mercedes-Benz is a professional and powerful vehicle fault diagnosis tool for car fans, small garages, repair workshop and mechanics by delivering OE-level diagnosis on all the electronic systems. It supports almost all Benz vehicles with standard OBDII 16PIN Diagnostic Port for Diesel & Gasoline. Diagnose Engine, Airbag, ABS, Gearbox and other ECU. Also featuring with special functions such as Oil Light Service Reset, ABS Bleeding, Battery Registration, EPB Electronic Park pad Brake Reset, Steering Angle Sensor Reset, etc. Meanwhile, it is also a proper tool working with OBDII/EOBD diagnostic for engines of all car, SUV, mini-van after 1996.

Basic Function:


Ø  Mercedes-Benz Multi-System Diagnostic

Ø  OBD/EOBD Engine Diagnostic for car, SUV, mini-van 1996 or newer

Ø  Read And Erase all systems fault code

Ø  Read Live Data stream and Vehicle Information


Special Function:


Ø  Oil Light Service Reset

Ø  ABS Bleeding

Ø  Battery Check and Battery Registration

Ø  Electronic Parking Brake Reset

Ø  Steering Angle Sensor Reset



Features And Functions:


Ø  Read and erase trouble codes of Mercedes-Benz Diesel or Gasoline, Engine, ABS, SRS, gearbox for up to thousands of different ECU systems; turn off the malfunction indicator light on dashboard

Ø  Read live data stream, view freeze frame data and vehicle identification data (VIN, CIN, CVN)

Ø  Oil Light Service Reset: Manual to set the OIL RESET

Ø  ABS Bleeding : Bleed out the air after changing the ABS oil, automatic or manual

Ø  EPB: EPB Apply and Release, Maintenance Mode.

Ø  ABS/AIRBAG: Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.

Ø  Battery check, Battery Registration: This is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life;

Ø  SAS: Steering wheel angle sensor calibration

Ø  Completely 10 modes of OBDII/EOBD diagnostic compliant to American, European and Asian cars, mini vans and SUVs 1996 and newer

Ø  Test the I/M readiness, O2 sensor, on-board monitor, component work status

Ø  Multilanguage interface: English, French, Spanish, German, Russian, Italian, etc.

Ø  Software upgradable via internet


Ø  For some models before 2002 manufacturing year, generally referring to the chassis of 107, 120, 124, 126, 129, 140, 170, 201, 202, 210, 218 and 463, which are with 38PIN diagnostic port, ND606 will not support them. If you are not sure about it, pls contact us at www.nexastech.com for solid clarification, thanks.

Ø  ND606 does not support SMART and BENZ VANs, like SPRINTER, VITO, VIANO, VANEO, VARIO, etc.